Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Ranger 2WD L4-140 2.3L SOHC >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Belt >> Service and Repair >> Removal

Removal

Special Service Tool Required:
Camshaft Belt Tension Adjusting Tool T74P-6254-A
Synchronizer Positioner T93P-12200-A

1. Align crankshaft so number on piston is at Top Dead Center (TDC) as indicated by timing mark.
2. Remove outer timing belt cover.

CAUTION: If you attempt to remove timing belt or adjust tension without loosening both timing belt tensioner adjusting bolt and spring pivot bolt, you will break Camshaft Belt Tension Adjusting Tool when you attempt to relieve tension on belt.

3. Loosen timing belt spring pivot bolt. Do not remove.






4. Hold tensioner with Camshaft Belt Tension Adjusting Tool.
5. While holding tensioner, loosen adjusting bolt and gradually release spring tension.
6. Using adjusting tool, PRY tensioner AWAY from belt. While holding, tighten adjusting bolt to hold tensioner AWAY from belt.
7. Remove timing belt.
pro multis · About Operation CHARM