Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

Air Flow Meter/Sensor: Service and Repair

Mass Air Flow Sensor:

REMOVAL

1. Loosen air cleaner outlet tube clamp at Mass Air Flow Sensor (MAF) and remove tube from sensor.

2. Disconnect electrical connector to MAF sensor.

3. Remove four retaining nuts.

4. Remove MAF sensor and discard old gasket.

INSTALLATION

1. Clean sealing surfaces of engine air cleaner and MAF sensor of old gasket material.

2. Position MAF sensor and new gasket to air cleaner cover aligning bolt holes.

3. Install four retaining nuts. Tighten to 10 Nm (7 ft lb).

4. Install air cleaner outlet tube (9B659) to MAF sensor. Tighten retaining clamp to 2-3 Nm (18-27 in lb).

5. Connect electrical connector to MAF sensor.

6. Start engine and check for air leaks and correct sensor operation.