Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Safety Belt With Anchor Plate Thread Damage
1. Remove the broken or stripped bolt and discard.2. Drill out the internal threads in the safety belt anchor plate with a 27/64-inch drill.
3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
4. Blow out the chips.
5. Install the attachment parts in the order shown, whichever is applicable. Tighten the replacement bolt to 30-40 N.m (22-30 ft-lb). Original parts are to be replaced with the repair parts. Unless specified in the guides, use original parts.
6. When repairing a multiple belt and attachment, install nut to the bolt in the tunnel area from the underside of the floorpan. Tighten to specification 30-40 N.m (22-30 ft-lb).