Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
ID2 - Service Connector/Terminal Fault
The most likely problem is at one of the affected component connectors such that terminals unseat or back out upon installation. At each affected connection, look for:
- Bent terminals.
- Damaged connector terminal locks.
- Damaged connector wedge.
NOTE: If one of the above conditions is found, Check the length of the affected circuit once the connection is remade. If the wire is too tight (short), damage is likely to recur once vehicle is given back to the customer. Service the wire as necessary to correct tight wire conditions.
^ Are any of the above conditions noted?
YES -- Service connector and terminal as necessary. Go to ID7. ID7
NO -- Go to ID6. ID6