D5 - Check Power to the RABS Electronic Control Module

Pinpoint Test Diagram:

- Turn the ignition to the ON position.

- Measure the voltage between RABS harness connector Pin 1 (or Pin 9) and chassis ground.

- Are 9 volts or more present?

YES -- Leave anti-lock electronic control module disconnected. Go to D6. [1][2]D6 - Check For Shorts In RABS Control Module Harness Connector

NO -- Repair Circuit 601 (LB/PK) or associated fuse. Reconnect anti-lock electronic control module. Repeat System Pre-Check. Description