Operation CHARM: Car repair manuals for everyone.
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Ignition Coil: Service and Repair

REMOVAL
1. Disconnect engine control sensor wiring connector from ignition coil and radio ignition interference capacitor.
2. Disconnect secondary ignition wire from coil.
3. Remove ignition coil to ignition coil mounting bracket retaining screws and remove coil.

INSTALLATION
1. Install ignition coil and retaining screws.
2. Tighten screws to 25-35 lb. in. (2.8-4.0 Nm).
3. Install secondary ignition coil wire.
4. Connect engine control sensor wiring connector from ignition coil and radio ignition interference capacitor.