Radius Arm: Service and Repair

1. Raise and support front of vehicle. Support axle.
2. Disconnect lower end of shock absorber from shock lower bracket and remove front spring as described previously.

Fig. 9 Radius Arm Replacement. 4x2 Models:

Fig. 10 Radius Arm Replacement. 4x4 Models:

3. Loosen axle pivot bolt. Remove spring lower seat from radius arm. Remove nut and bolt from radius arm to axle and front bracket, Fig. 19 and 20.
4. Remove nut, rear washer and insulator from rear side of radius arm rear bracket and remove radius arm. Remove inner insulator and retainer from radius arm stud.
5. Reverse procedure to install.