Manufacturer Code Charts: 4: 4.2

Connector:

- Remove valve connector.

- Inspect valve component connector Pins 2 and 3.

- Inspect valve harness connector Pins 2 and 3.

- Pull gently on Pin 2 wire just behind the harness connector.

- Pull gently on Pin 3 just behind the harness connector.

- Are connections clean and secure?

YES -- Leave valve connector disconnected. Go to 4.3. 4.3

NO -- Service terminal or connector as needed. If not serviceable, Replace anti-lock brake control module. Go to 4.10. 4.10