Manufacturer Code Charts: 8: 8.3

Connector Diagram:

- Set ohmmeter on 20 ohm scale.

- Measure resistance between module harness connector Pin 8 and valve harness connector Pin 4.

- Measure resistance between module harness connector Pin 14 and valve harness connector Pin 4.

- Is resistance less than 10 ohms?

YES -- Repair short in Circuit 664 (Y/LG) between anti-lock electronic control unit and anti-lock brake control module. Go to 8.5. 8.5

NO -- Conflict of information. Repeat 8.1. 8.1