K11 Measure RABS Sensor Air Gap

- Remove Rear Axle Differential Cover.

- Measure the shortest distance from the RABS sensor pole piece to the teeth on the antilock ring.

- Rotate the axle 60�-90�.

- Repeat the second and third steps for a total of five measurements.

- Are all measurements between 0.127mm (0.005 inch) and 1.14mm (0.045 inch) and within 0.254mm (0.010 inch) of each other?

YES -- Go to K13.

NO -- Measurements are not between 0.127mm (0.005 inch) and 1.14mm (0.045 inch). Check for foreign material under RABS sensor mounting flange and on carrier housing. Replace RABS sensor. Go to K12.

NO -- Not all measurements are within 0.254mm (0.010 inch) of each other. Replace antilock ring -- Go to Pinpoint Test S.