M11 Begin Intermittent Diagnosis

- Monitor resistance between the two pins of the sensor component 2-pin connector.

- Wiggle brake hose/right front brake antilock sensor cable assembly along its entire length. Pay special attention near connector and right front brake antilock sensor housing itself.

- Is the resistance measurement effected during wiggle test?

YES -- Wiring fault in right front brake antilock sensor lead has been detected. Inspect for obvious cable routing issues. Correct as necessary. Replace right front brake antilock sensor. Go to M16 to verify concern is resolved. M16 Verify Concern Is Resolved

NO -- Go to M12. M12 Inspect RF Brake Sensor For Hidden Damage