P10 Inspect VSS For Hidden Housing/Electrical Damage

- Remove the vehicle speed sensor from the rear differential.

- Inspect the plastic housing carefully for stress cracks or breaks.

- Inspect the vehicle speed sensor connector cavity for evidence of water entry, pin corrosion, or excessive debris.

- Are any of the above found?

YES -- Vehicle speed sensor housing damage is found. Inspect vehicle speed sensor harness routing for excessive tightness or any obvious sources or stress on the vehicle speed sensor. Correct as necessary. Replace sensor. Go to P14. P14 Verify Concern Is Resolved

YES -- Water intrusion or pin damage is found. Replace harness 2-pin connector assembly. Clean vehicle speed sensor terminals as necessary. Pack vehicle speed sensor connector cavity with dielectric grease. Go to P14. P14 Verify Concern Is Resolved