System Specifications

Connecting Rod Cap [03]
Cylinder Head [01]
Damper Or Pulley 212 ft lb
Exhaust Manifold 45 ft lb
Flywheel To Crankshaft 47 ft lb
Glow Plug 14 ft lb
Intake Manifold 24 ft lb
Main Bearing Cap [02]
Rocker Arm Post Attaching Bolts 20 ft lb
Rocker Cover 6 ft lb
Secondary Flywheel To Primary Flywheel 47 ft lb
Turbocharger Exhaust Inlet Pipes To Exhaust Manifolds 36 ft lb
Turbocharger Exhaust Inlet Pipes Exhaust Manifold Bolts 36 ft lb
Turbocharger Pedestal To Engine Block Bolts 18 ft lb
Water Housing Outlet (Thermostat To Crankcase) 20 ft lb
Water Pump Attaching Bolts 14 ft lb

[01] -- Refer to Cylinder Head, for tightening procedure.
[02] -- Torque main bearing cap bolts in two steps, first step to 75 ft lb, second step to 95 ft lb.
[03] -- Torque connecting rod nuts in two steps, first step to 38 ft. lb, second step to 51 ft lb.