Antenna Base

Antenna Base

Removal

1. CAUTION: Use appropriate fender protection to prevent damage to the paint when removing antenna base.

Remove the antenna mast from the antenna base.

2. Unsnap radio antenna base cap from antenna base and remove radio antenna base cap

3. Remove three antenna base attaching screws and remove antenna base from vehicle.

4. Fixed antenna only, disconnect radio antenna lead in cable.

5. Remove radio antenna base gasket.


Installation

1. To install, reverse removal procedure.

2. NOTE: Connect the radio antenna lead in cable to the antenna base if it was disconnected during removal.

Tighten top radio antenna nut 9.5-10.5 Nm (84-93 lb-in).