Upper Series Floor Console Rear Controls

Removal and Installation
1. Open floor console armrest.
2. Disconnect electrical connections (based on vehicle option).
3. Remove tour (4) screws at back of console (inside).





4. Remove one (1) screw attaching armrest to console. Remove armrest.
5. Remove three (3) screws attaching rear bezel to console. (Screws are located behind the armrest hinge.)
6. Open rear cupholder door and remove four (4) screws attaching cupholder to console. Remove bezel assembly.





7. At back of console, remove tour (4) screws attaching rear ICP to rear console body.
8. Disconnect linkage to rear air duct.
9. Disconnect two electrical connectors.





10. Remove rear ICP.

For installation, follow removal procedures in reverse order.