System Diagram

Item Part Number Description

1. 2853 Front Parking Brake Cable and Conduit
2. 2780 Parking Brake Control
3. 2A635 Parking Brake Rear Cable and Conduit (RH)
4. 2A709 Rear Parking Brake Cable Retainer
5. 2A530 Parking Brake Cable Insulator
6. 2530 Parking Brake Cable Bracket
7. 2A635 Parking Brake Rear Cable and Conduit (LH)
8. 2273 Grommet
9. 2A793 Parking Brake Intermediate Cable
10. N610959-S2 Bolt, Front Parking Brake Cable Clamp
11. 377699-S8 Clamp, Front Parking Brake Cable and Conduit
12. -- Parking Brake Release Handle (Part of 2780)
13. N806497-S2 Bolt, Parking Brake Control-to-Cowl Side
14. N611194-S2 Bolt, Parking Brake Cable Retainer Clip
15. 2A826 Parking Brake Cable Retainer Clip
16. N802621-S53B Nut
17. N605933-S2 Bolt, Parking Brake Cable Bracket-to-Frame

A -- Tighten to 15-20 Nm (11-14 ft lb).

B -- Tighten to 17-23 Nm (13-17 ft lb).

C -- Tighten to 6-8 Nm (54-70 lb-in).

D -- Parking Brake Front Cable and Conduit
Before Inserting into Ratchet Plate Pivot Hole.
E -- Parking Brake Front Cable and
Conduit After Inserting into Ratchet Plate Pivot Hole.
F -- Parking Brake Front Cable and
Conduit, Installed.
G -- 4mm (5/32-Inch) Steel Pin or
Equivalent Size Drill Bit.
H -- Tighten to 68-92 Nm (51-67 ft lb).