Fan Blade: Service and Repair

1. Remove fan clutch from water pump pulley by turning clutch assembly nut. Use fan clutch holding tool No. T84T-6312-C, or equivalent, and fan clutch nut wrench tool No. T93T-6312-B, or equivalent.
2. Remove fan shroud retaining screws.
3. Remove fan blade, fan clutch and shroud.
4. If fan blade and clutch must be separated, remove remaining bolts attaching fan blade to fan clutch.
5. Reverse procedure to install. Torque fan blade to fan clutch attaching bolts to 12-18 ft lb.