EGR Tube: Service and Repair

REMOVAL
^ Remove the EGR transducer retaining bolt and reposition the EGR transducer to access the EGR external pressure valve.
^ Disconnect the EGR valve to exhaust manifold tube at the EGR external pressure valve and exhaust manifold.
^ Disconnect hoses and remove EGR valve to exhaust manifold tube.
^ Remove EGR valve tube to manifold connector from exhaust manifold.

NOTE: EGR valve to exhaust manifold tube and EGR transducer hoses must be routed behind transmission kickdown cable.

INSTALLATION
^ To install, reverse removal procedure. Tighten EGR valve tube to manifold connector and EGR valve to exhaust manifold nuts to 34-48 Nm (25-35 ft lb). Tighten EGR transducer retaining bolt to 20-30 Nm (15-22 ft lb).