Inboard Front Safety Belts

Removal and Installation

SPECIAL SERVICE TOOL(S) REQUIRED

Description Tool Number
Seat Belt Bolt Bit (No.50 Torx(R)) T77L-2100-A

Remove the bolts securing the front seat center passenger belt and front safety belt buckle end to front floor pan (one each side). Remove front seat center passenger belt and front safety belt buckle end from vehicle.

For installation, follow removal procedures in reverse order. Using Seat Belt Bolt Bit (No.50 Torx(R)) T77L-2100-A, tighten bolt to 30-40 N.m (22-30 lb-ft).
- Check the restraint system for proper operation.
- Cable must wrap around front crossmember.
- Check sealer around floor anchor bolt hole and add Ford Caulking Cord D6AZ-19569-A or equivalent meeting Ford specification ESB-M4G32-A.