System Specifications

Dana Model 35 Front Drive Axle Specifications

Description Specification
Carrier Spread Removal 0.25mm (0.010 Inch)
Installation 0.37mm (0.015 Inch)
Drive Pinion Rotational Torque 1.7-2.8 Nm (15-25 Lb-In)
Drive Pinion Nut Torque 271-475 Nm (200-350 Lb-Ft)
Ring Gear and Pinion Backlash 0.13-0.20mm (0.005-0.008 Inch)


TORQUE SPECIFICATIONS

Bearing Cap Bolts 64-91 Nm / 47-67 Lb-Ft
Front Driveshaft U-Bolt Nuts 19 Nm / 14 Lb-Ft
Ring Gear Bolts 95-122 Nm / 70-90 Lb-Ft
Wheel and Tire Assembly Lug Nuts 115-155 Nm / 85-115 Lb-Ft
Yoke Nut 271-475 Nm / 200-350 Lb-Ft
Cover Plate 27-34 Nm / 20-25 Lb-Ft
Caliper Guide Pin Bolts 33 Nm / 24 Lb-Ft
Front Wheel Knuckle Castle Nuts 91 Nm / 67 Lb-Ft
Axle Housing Bolts 66 Nm / 49 Lb-Ft
Steering Knuckle Pinch Bolts 91 Nm / 67 Lb-Ft