Attachment II - Labor and Parts Information

LABOR ALLOWANCES








PARTS ORDERING INFORMATION

Parts will not be direct shipped for this recall Order your parts requirement through normal order processing channels as noted below:

Structural Adhesive Ordering Information

Structural adhesive is only required when performing Service Procedure B (Cracked or torn liftgates.) The following metal or panel bonding adhesives, or equivalent must be used.

Lord Corporation:

^ FUSOR 109B Metal Bonding Adhesive - 50 ML (1.7 oz) cartridge - uses applicator gun from Safety Recall 97S88. Contains enough adhesive to do about four (4) vehicles. (Conversion kit 513 for standard caulking gun is also available).

or

^ FUSOR 108B Metal Bonding Adhesive - 300 ML (10.1 oz) cartridge - uses applicator gun 301 available from your local distributor.

^ Obtain locally. Call 1-800-234-FUSOR ext. 3 to find nearest local distributor.

3M Automotive Aftermarket Division:

^ Panel Bonding Adhesive # 08115 - 200ML (approx 6 oz) cartridge

^ One cartridge contains enough adhesive to do about 12 vehicles

^ Obtain from your local 3M distributors. If you need further assistance call 1-800-521-8180 ext. 5165

REPLACEMENT LIFTGATES AND FCS-700 TAGS

Replacements:

The liftgate is only replaced if the sheet metal at the attachment area is cracked or torn beyond the perimeter of the 7-rivet reinforcement plate. However, you must call the Recall Hotline at 1-800-325-5621 for prior approval.

NOTE:
Do not install Reinforcement Plate Kit on replacement liftgate.

FCS-700 Tags:

To avoid a "charge-back" for the replacement of the liftgate, cut out the damaged section of the liftgate, attach the completed FCS-700 tag to the cut out piece and return it to Ford Motor Company. (Only return one side if both sides are cracked or torn beyond the perimeter of the 7-rivet reinforcement plate ).

DEALER PRICE
For latest prices, refer to:

^ DOES II

^ Updated Price Book

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.