Front Driveshaft

Driveshaft, Front

Removal

1. NOTE: Mark the driveshaft and front drive axle yoke before disassembly so that they can be assembled in the same position.

Remove the nuts and U-bolts retaining the front driveshaft to the front drive axle.

2. Remove attaching bolts retaining driveshaft to the transfer case. Remove driveshaft from the vehicle.

Installation

1. Position driveshaft to transfer case companion flange and install attaching bolts. Tighten to specifications.

2. Position driveshaft to front axle. Install the U-bolts and nuts. Tighten the nuts to 11-20 Nm (8-15 lb-ft).