Power Window Switch

Master Switch, Explorer Four-Door Only






1. Use a self-powered test lamp or Rotunda Digital Volt-Ohmmeter 007-00001 or equivalent to test the window regulator control switch.

2. With the window regulator control switch in the NEUTRAL position, there should be continuity between terminals 1, 2, 3, 4, 5, 6, 7, 8 and 9 and terminals 10 and 11.

3. When the raised portion of all the switch rocker knobs is pushed (to raise the windows), there should be continuity between terminals 1, 3, 5, 7, 10 and 11 and terminals 2, 4, 6, 8 and 9.

4. When the depressed portion of all the switch rocker knobs is pushed (to lower the windows), there should be continuity between terminals 1, 3, 5, 7 and 9 and terminals 2, 4, 6, 8, 10 and 11.

5. With the lock out switch button depressed into its detented position, terminal 11 should not have continuity with any other terminal.

6. If the window regulator control switch does not test as stated, replace the window regulator control switch.