Diagnostic Notes

RABS Speed Sensor Mini-Schematic:

DESCRIPTION
Code 10 is generated by the antilock electronic control module's detection of low RABS sensor resistance. The code may also be generated by a short circuit in the Circuits 519 (LG/BK) or 523 (R/PK), or a failed internal antilock electronic control module circuit.

POSSIBLE CONTRIBUTING BASE BRAKE COMPONENT/VEHICLE WIRING CONCERNS
- Short between antilock electronic control module harness connector Pin 3 and Pin 10
- Short between RABS sensor connector Pins A and B
- Bulkhead connector (between engine compartment and instrument panel (04320)) sensor terminals shorted together
- Intermittent short circuit in Circuits 519 (LG/BK) or 523 (R/PK)