Solenoids SS1, SS2, TCC (CCC), CCS

Solenoid Resistances.:

- Set ohmmeter to 100-200 ohm range.
- Connect positive lead of ohmmeter to the appropriate VPWR jack for the solenoid being tested.
- Connect negative lead of the ohmmeter to the appropriate solenoid (SS-1, SS-2, TCC (CCC), CCS) jack and record resistance.
- Refer to the Specification chart for correct values.

If out of specification, refer to Pinpoint Test A (SS-1, SS-2); Pinpoint Test C (TCC), or Pinpoint Test G (CCS).