Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Probe V6-153 2.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Throttle Position Sensor: Service and Repair

REMOVAL

1. Disconnect negative battery cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Disconnect Throttle Position (TP) sensor electrical connector.

3. Remove two TP sensor set screws and lift sensor from throttle body.


INSTALLATION

Throttle Position Sensor:





1. Open the throttle slightly to align the tab A and tab B of the TP sensor to the throttle body.

2. Align the mounting holes and install the TP sensor.

3. Check that tab A and tab B are properly aligned. Properly adjust TP sensor. Adjustments

4. Tighten the TP sensor set screws to 2.0 Nm (14-20 lb in).

5. Connect the battery ground cable.
pro multis · About Operation CHARM