Vehicle Speed Sensor: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Remove the engine air cleaner.

3. Disconnect the electrical connector from the Vehicle Speed Sensor (VSS).

4. Remove the VSS bolt.

5. Remove the vehicle speed sensor from the transaxle.






INSTALLATION

1. Replace the O-ring.

2. Install the VSS bolt and tighten to 8-10 Nm (71-88 lb in).

3. Connect the electrical connector.

4. Install the engine air cleaner.

5. Connect the battery cable.