B14 Verify Concern Is Resolved

- Key OFF.

- Reconnect and reassemble all components.

- Connect NGS Tester.

- Key ON. Clear codes.

- Perform Drive Test DT1. Monitors, Trips, Drive Cycles and Readiness Codes

- Pull codes. Reading and Clearing Diagnostic Trouble Codes

- Is system pass obtained?

YES -- Stop. Repair is complete.

NO -- Same code is present. Repeat B1 to check for second related concern. B1 Check For Voltage at Pin 17

NO -- A new code is present. Go to the appropriate pinpoint test. Diagnostic Trouble Code Descriptions