Instrument Cluster - Replacement

REMOVAL

CAUTION: If gauges are being removed from the cluster assembly, do not remove the gauge pointer. Magnetic gauges cannot be recalibrated.

1. Disconnect the battery ground cable.
2. Remove radio.
3. Remove two center instrument panel finish panel screws. Disconnect electrical connectors and remove panel.
4. Remove two hood latch control handle and cable screws from lower steering column cover.
5. Remove two lower steering column cover screws and remove cover.
6. Remove six instrument panel steering column opening cover reinforcement screws and cover reinforcement.
7. Remove three steering column shroud screws and separate upper/lower shroud from steering column tube.
8. Remove five cluster instrument panel finish panel screws. Disconnect electrical connectors and remove panel.
9. Disconnect Transmission Range (TR) indicator thumbwheel.





10. Remove four instrument cluster screws.





11. Disconnect the three instrument cluster electrical connectors and remove the instrument cluster.

INSTALLATION
To install, reverse the removal procedure.