Ignition Coil Bracket

REMOVAL
1. Remove the ignition coil and radio ignition interference capacitor from ignition coil mounting bracket.
2. Remove screw retaining wiring harness retainer to ignition coil bracket.
3. Remove two bolts securing ignition coil bracket to cylinder head and accessory drive belt tensioner bracket.
4. Remove nut securing ignition coil bracket to intake manifold stud.
5. Remove ignition coil bracket.

INSTALLATION
1. For installation, follow removal procedures in reverse order.
2. Tighten ignition coil bracket retainer bolts and nut to 20-30 Nm (15-22 ft lb).