Relay Box Cover - Removal Procedure

Article No.
94-11-19

06/01/94

RELAY BOX COVER - REMOVAL PROCEDURE

LIGHT TRUCK:
1995 WINDSTAR

ISSUE:
Some relay box covers may be difficult to remove without damaging the cover.

ACTION:
Follow the service procedure to properly remove the relay box cover.

SERVICE PROCEDURE





1. To remove the relay box cover (located under the driver's side instrument panel), insert a flat blade screwdriver into the release tabs located on the left side of the relay box cover.

2. Push the screwdriver handle to the right to release the tabs.

3. Pull downward on the "Pull" tab located on the right side of the relay box cover and remove.

NOTE:
THE COVER MAY BE DAMAGED IF THIS PROCEDURE IS NOT FOLLOWED.

WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 190000, 290000