Driven Sprocket Support

DISASSEMBLY

Driven Sprocket Support Service:

1. Clamp driven sprocket support vertically in a soft-jawed vise.
2. Inspect, and if necessary, replace the driven sprocket bearing using Stator and Driven Sprocket Bearing Remover T94P-77001-KH, Impact Slide Hammer T50T-100-A and Puller T58L-101-B.


ASSEMBLY

Driven Sprocket Bearing Installation:

Press driven sprocket bearing using Stator and Driven Sprocket Bearing Replacer T86P-70043-B.