E6 Possible Conditions Not Checked

NOTE: The ABS is DISABLED with the Rotunda Breakout Box 014-00322 or equivalent installed.

- It is assumed that the wiring integrity has been verified and that the Antilock hydraulic control unit and Antilock brake electronic control module have been replaced. The following are time-consuming and should be performed only after all previous possibilities have been exhausted.

- Inspect Circuits 532 and 498 along their entire length from the sensor connector to the harness connector of the Antilock brake electronic control module for chafing or any other damage that could lead to any open or shorted condition.

- Install Rotunda Breakout Box 014-00322 with Rotunda Breakout Box Adapter with Overlay 007-00103 or equivalent. Repeat test Step E1 while driving vehicle. Look for any change in indicated continuity (turning on the DVOM beeper will help).