11 Yellow ABS Warning Light Flashes 11 Times

POSSIBLE SOURCE(S):
- Terminal backout in the antilock electronic control module harness connector at Pin 11.
- Missing (burned-out) stoplamps. All stoplamps must be missing or burned out to cause a Code 11.
- An intermittent/continuous open in Circuit 511 (LG). This open would be between antilock electronic control unit connector Pin 11 and the stoplight switch.
- Worn or damaged stoplight switch.

ACTION(S) TO TAKE:
- Go to Pinpoint Test Q. Q DTC 11 Yellow Rear ABS Warning Light Flashes 11 Times