4 Yellow ABS Warning Light Flashes 4 Times

POSSIBLE SOURCE(S):
- Terminal backout in the antilock electronic control module harness connector at Pin 6.
- Terminal backout in the RABS valve harness connector at Pins 2 or 3.
- Bulkhead connector (between engine compartment and instrument panel) terminal backout or loose connection.
- Antilock electronic control module or RABS valve connectors not fully mated with component.
- Intermittent open or open circuit in Circuits 535 (LB/R), or 274 (BK/W).
- Intermittent short or short circuit in Circuit 535 (LB/R).
- Defective RABS valve.

ACTION(S) TO TAKE:
- Go to Pinpoint Test H. H DTC 4 Yellow Rear ABS Warning Light Flashes 4 Times