Fuel Pressure Test Port: Service and Repair

REMOVAL

NOTE: Fuel pressure relief cap on fuel pressure relief valve must be removed.

1. Refer to Fuel Pressure Release/Service and Repair for proper fuel pressure relief.
2. Remove fuel pressure relief valve cap on fuel pressure relief valve.
3. Using an open-end wrench or suitable deep-well socket, remove fuel pressure relief valve.

INSTALLATION
1. Install fuel pressure relief valve and fuel pressure relief valve cap. Tighten fuel pressure relief valve to 7.75 N.m (69 lb in) and the fuel pressure relief valve cap to 0.6 N.m (5.3 lb in).
2. Perform Post-Service procedures, Refer to Fuel Pressure/Testing and Inspection/Procedures/Fuel Pressure Test for properly restoring fuel pressure.