Calif

REMOVAL
1. Disconnect the Exhaust Gas Recirculation (EGR) valve sensor wire harness at EGR valve sensor.
2. Disconnect the EGR valve to exhaust manifold tube from EGR valve and vacuum hose.
3. Remove EGR valve retainer bolts and EGR valve from upper intake manifold.
4. Remove EGR valve gasket. Clean residue from upper intake manifold gasket surface.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten EGR valve to exhaust manifold tube nut to 34-47 N.m (25-35 lb ft). Tighten EGR valve retaining bolts to 34-47 N.m (25-35 lb ft).