Front Seat Belt, Retractor and Tongue

Safety Belts,Right Front Bucket/Captain's Chair,Typical View:

Safety Belts, Front Outboard Position, Bucket and Captain's Chairs - Cutaway Only:

Removal
1. Remove shoulder strap guide cover.
2. Remove the upper anchor bolt attaching D-ring using Safety Belt Bolt T77L-2100-A (No.50 Torx(R))
3. Remove safety belt retractor cover and, using the Safety Belt Bolt Bit, remove bolt attaching front safety belt retractor and tongue.
4. Remove the lower anchor bolt attaching front safety belt to front floor pan using the Safety Belt Bolt Bit.
5. Remove front door scuff plate to access bolt anchoring front safety belt. Remove bolt.
6. Remove front safety belt retractor and tongue.

Installation
1. Follow removal procedures in reverse order.
2. Check sealer around floor anchor bolt holes and add Ford Caulking Cord D6AZ-19560-A.
3. Tighten anchor bolts to 34-46 Nm (25-34 lb-ft).
4. Check the restraint system for proper operation.