Disassembly and Assembly

WITH C6

DISASSEMBLE

CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.

Sun Gear Snap Ring Replacement:

1. Remove rear snap ring from sun gear.

Input Shell And Sun Gear Assembly:

2. Remove thrust washer.
3. Working from inside shell, remove sun gear. Remove forward snap ring.

ASSEMBLE
1. Reverse procedure to assemble.

NOTE: When installing sun gear, ensure longer end is at the rear.