Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Explorer 2WD V6-245 4.0L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Testing and Inspection

NOTE: To test speed control actuator switch, perform the following voltage and resistance measurements.

Speed Control Switch Assembly Voltage Specifications.:





For voltage measurements, remove 14401 harness connector from speed control servo, then connect negative lead of voltmeter to Pin 10 (circuit 676 PK/O) of connector. Measure DC or AC voltage of circuits listed with positive lead of meter.

Speed Control Actuator Switch Resistance Measurements.:





For resistance measurements, remove 14401 harness connector at speed control servo, then connect an ohmmeter between the designated circuits with ignition switch off.

pro multis · About Operation CHARM