Removal and Installation

Intake Air System:

REMOVAL
1. Disconnect crankcase ventilation hose from air cleaner outlet tube.
2. Disconnect Mass Air Flow (MAF) sensor electrical connector.
3. Disconnect Intake Air Temperature (IAT) sensor electrical connector.
4. Loosen the air cleaner outlet tube-to-throttle body clamp.
5. Carefully lift the engine air cleaner and remove the engine air cleaner and the air cleaner outlet tube together as an assembly.

INSTALLATION

NOTE: A mild detergent solution may be used to ease assembly of engine air cleaner to engine air cleaner mounting bracket and inner front fender.

1. To install, reverse the removal procedure.
Tighten the air cleaner outlet tube-to-throttle body clamp to 2-3 N.m (18-27 lb in).