Ignition Coil: Service and Repair

Removal
1. Disconnect wiring harness at ignition coil.

CAUTION: Do not pull directly on high tension wire. It may separate from connector in boot. Grasp boot by hand and remove with a twisting motion.

2. Disconnect high tension wire at ignition coil .
3. Remove ignition coil to bracket attaching screws and remove ignition coil.

Installation
1. Follow removal procedures in reverse order.
2. Tighten ignition coil to bracket attaching screws to 2.8-4.0 Nm (25-35 lb in).