Manifold Pressure/Vacuum Sensor: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect negative battery cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

2. Disconnect vacuum source from Manifold Absolute Pressure (MAP) sensor.
3. Remove fasteners attaching manifold absolute pressure sensor and bracket assembly below cowl drip rail.
4. Remove MAP sensor fasteners on A/C evaporator case.
5. To install, follow removal procedures in reverse order.