A1 Check Resistance Circuit 514 to Circuit 516

- Disconnect 16-pin connector on jumper from ABS assembly to wire harness.

- Measure resistance between pins 2 and 13 on wire harness side connector.

- Is resistance between 1015 and 1245 ohms?

YES -- Go to A3. A3 Check Circuits 514 (Y/R) and 516 (Y/BK)

NO -- Go to A2. A2 Check Right Front ABS Sensor Resistance

Connector:

Pin Number Circuit Circuit Function

1 499 (GY/BK) Left Rear Brake Sensor
2 514 (Y/R) Right Front Brake Sensor
3 522 (T/BK) Left Front Sensor Ground
4 Not Used
5 494 (T/LG) Right Rear Brake Sensor Ground
6 496 (O) Left Rear Brake Sensor Ground
7 521 (T/O) Left Front Brake Sensor
8 Not Used
9 492 (BR) Right Rear Brake Sensor
10 836 (O/W) ABS Data Link Connector
11 Not Used
12 Not Used
13 516 (Y/BK) Right Front Brake Sensor Ground
14 Not Used
15 810 (R/LG) Stoplight Switch Input
16 603 (DG) Anti-Lock Indicator Output