Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Ranger 2WD V6-182 3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Temperature Sensor ( Ambient / Intake ) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Intake Air Temperature (IAT) Sensor:






REMOVAL AND INSTALLATION
1. Disconnect negative battery cable.

NOTE: When battery voltage is removed from the Powertrain Control Module (PCM), all learned values will be cleared and reset to predetermined values. When battery voltage is restored to the PCM, the vehicle may exhibit certain driveability concerns. It will be necessary to drive the vehicle to allow the PCM to relearn values for optimum driveability and performance.

2. Disconnect electrical connector from Intake Air Temperature (IAT) sensor.
3. Remove IAT sensor.
4. To install, reverse removal procedure.
5. Connect negative battery cable.
pro multis · About Operation CHARM