New Generation STAR Tester

Diagnostic Monitoring Test Results Table:

PURPOSE
The purpose of the Diagnostic Monitoring Test (mode 06) is to allow access to the results of OBD II Monitor diagnostic tests. The test values that are stored at the time of the particular monitor completion are displayed when the particular test identification is requested.

PROCEDURE
- Perform the necessary vehicle preparation and visual inspection.
- Connect scan tool to Data Link Connector (DLC)
- Select VEHICLE & ENGINE SELECTION menu (OPTIONAL).
- Select NEW VEHICLE YEAR & MODEL.
- Select year, engine, model with the appropriate qualifier, if needed (i.e., transmission, 49 States, California) (OPTIONAL).
- Follow operating instructions from the menu.
- Select GENERIC OBD II FUNCTIONS.
- Press CONT button if all OBD II monitors are not complete.
- Select DIAGNOSTIC MONITORING TESTS.
- Select MANUFACTURER SPECIFIC TEST ID.
- Scroll up to the test number and trigger.