System Pre Check

RABS Valve Connector And Pin View:

DESCRIPTION
Code 2 is generated by the module's detection of an open circuit in Circuit 599 (PK/LG). The code may also be generated by a failed isolation solenoid (open coil) internal to the anti-lock brake control module or a failed internal module circuit.

Possible Contributing Base Brake Component/Vehicle Wiring Concerns
- Terminal backout in the module harness connector at Pin 13
- Terminal backout in the RABS valve harness connector at Pin 1
- Bulkhead connector (between engine compartment and instrument panel) terminal backout or loose connection
- Anti-lock electronic control unit or RABS valve connectors not fully mated with component
- Intermittent open circuit in Circuit 599 (PK/LG)