Manufacturer Code Charts: 3: 3.2

- Remove RABS valve connector.

- Inspect RABS valve connector Pin 4.

- Gently pull on Pin 4 wire just behind harness connector.

- Are connections clean and secure?

YES -- Leave RABS valve connector disconnected. Go to 3.3. 3.3

NO -- Terminal(s) in RABS valve connector are loose, bent, deformed, corroded, or missing. Service terminal or connector as needed. If not serviceable, Replace RABS valve. Go to 3.6. 3.6

NO -- Terminal(s) in harness connector move back or come free of connector. Service terminal or connector as needed. Go to 3.6. 3.6