Manufacturer Code Charts: 3: 3.5

NOTE: Be sure to complete all steps. Failure to do so may lead to replacement of good parts.

- This step requires that a valid diagnostic trouble code has been obtained, all prior diagnostic steps have been completed, and the affected wiring integrity has been verified.

- Have all prior diagnostic steps been completed as described above?

YES -- Replace anti-lock electronic control module. Go to Step 3.6. 3.6

YES -- If anti-lock electronic control module has been replaced and no resolution has been reached, Replace RABS valve. Go to step 3.6. 3.6

NO -- Go to diagnostic step last completed and continue.