System Pre Check

Connector Diagram:

DESCRIPTION
Code 8 is generated when the anti-lock electronic control module detects a missing dump solenoid output. This concern can only be detected during an ignition self-test or during a RABS stop.

POSSIBLE CONTRIBUTING BASE BRAKE COMPONENT/VEHICLE WIRING CONCERNS
- Anti-lock electronic control module internal fuse blown or internal open circuit
- Shorted dump solenoid internal to RABS valve
- Intermittent short or shorted circuit in Circuit 664 (Y/LG)
- Bulkhead connector between engine compartment and instrument panel terminals shorted

NOTE: Use Rotunda(r) 73 Digital Multimeter 105-00051 or equivalent for electrical tests.